Solid waste produced by the nonferrous smelting industry has a significant number of notable differences. The lack of recognition of solid waste characteristics is the main factor restricting its disposal and utilization. In this study, we analyzed the main production processes of the nonferrous smelting industry; identified the key production nodes of solid waste; and clarified the characteristics, including the physical, chemical, and pollution characteristics of solid wastes, through a large sample statistical analysis. We found similarities among solid wastes from a common generation source as well as notable differences among the different generation sources: slags and sludges from waste acid treatment and wastewater treatment units had a water content of 27.43-52.71% and 51.14-68.27%, respectively, which were significantly higher than those of other metallurgy and dust collection units; the pH of slags from an electrorefining unit was strongly alkaline; the mineral phase of sludges from wastewater treatment was only calcite; slags from a waste acid treatment unit were mainly in phase of gypsum, claudetite, and anglesite; the chemical composition of slags from pyrometallurgy and hydrometallurgy units was mainly SiO2 and Fe2O3. In this paper, we discuss a new classification method based on a common generation source for the first time. These results are beneficial to guide the disposal, utilization, and management of solid waste.
Keywords: Classification method; Common generation source; Nonferrous smelting industry; Solid waste characteristic.
© 2023 The Authors.