A novel method for simulating ex vivo tooth extractions under varying applied loads

Abstract

Background: Tooth extraction is a common surgical procedure where the invasiveness of the surgery can affect the nature of the dentoalveolar remodelling which follows. However, there is very little biomechanical data relating the loading applied during tooth extraction to the outcomes of the procedure. The purpose of this pilot study is to present a novel ex vivo experimental method for measuring tooth extraction mechanics and to explore preliminary metrics for predicting extraction success.

Methods: A custom experimental apparatus was developed in-house to extract central incisors from ex vivo swine mandible samples. Twenty-five (n = 25) incisors were extracted at different rates in displacement- and force-control, along with an intermittent ramp-hold scheme for a total of five schemes. Peak forces and extraction success were recorded for each test. Video analysis assisted in determining the instantaneous stiffnesses of the dental complex during continuous extractions, which were compared using the K-means clustering algorithm.

Findings: Tooth extraction forces ranged from 102 N to 309 N, with higher-rate tests tending towards higher peak forces (141 N - 308 N) than the lower-rate tests (102 N-204 N) for displacement- and force-controlled schemes. The K-means algorithm clearly identified load rates among tests, indicating that higher-rate loading increased system stiffness relative to the lower-rate tests.

Interpretation: The developed experimental method demonstrated a desirable degree of control. The preliminary results suggest the influence of load rate on the mechanical response of the dental complex and extraction outcome. Future work will further investigate the biomechanics of tooth extraction and relate them to tissue damage to improve future tooth extraction procedures.

Keywords: Atraumatic extraction; Dental biomechanics; Exodontia; Experimental methods; Tooth extraction.