Selection of breathing phase number in 4D scanned proton treatment planning optimization for lung tumors

Abstract

The standard four-dimensional (4D) treatment planning includes all breathing states in the optimization process, which is time-consuming. This work was aimed to optimize the number of intermediate phases needed for 4D proton treatment planning optimization to reduce the computational cost. Five 4D optimization strategies adopting different numbers of intermediate states and one three-dimensional (3D) optimization plan were studied for fifteen lung cancer patients treated with scanned protons, optimizing on all ten phases (4D_10), two extreme phases (4D_2), six phases during the exhalation stage (4D_6EX), six phases during the inhalation stage (4D_6IN), two extreme phases plus an intermediate state (4D_3) and average computed tomography image (3D), respectively. The 4D dose evaluation was conducted on all the ten phases, considering the interplay effect. The resulting doses accumulated on the reference phase were computed and compared. Compared to the 4D optimization plans, the 3D optimization plan performed inferiorly in target coverage, but superiorly in organ at risks (OARs) sparing. For the 4D optimization, all the five 4D plans showed similar performance in OARs protection. However, the 4D_6EX and 4D_6IN strategies out-performed the 4D_2 and 4D_3 plans in dose homogeneity. The computing times of the 4D_2, 4D_3, 4D_6EX and 4D_6IN approaches decreased to 32%, 41%, 66% and 67% of the 4D_10 method, respectively. Thus, our study suggested that the use of all phases during inhalation or exhalation stage might be a feasible approach substituting for the full phase strategy to reduce the calculation load while guaranteeing the plan quality for scanned proton therapy.

Keywords: 4D optimization; Lung tumor; Proton therapy; Respiratory motion.