Vanadium-based catalysts have been commercially used in selective catalytic reduction (SCR), owing to their high catalytic activity and effectiveness across a wide temperature range; however, their catalytic efficiency decreases at lower temperatures under exposure to SOX. This decrease is largely due to ammonium sulfate generation on the catalyst surface. To overcome this limitation, we added ammonium nitrate to the V2O5-WO3/TiO2 catalyst, producing a V2O5-WO3/TiO2 catalyst with nitrate functional groups. With this approach, we found that it was possible to adjust the amount of these functional groups by varying the amount of ammonium nitrate. Overall, the resultant nitrate V2O5-WO3/TiO2 catalyst has large quantities of NO3- and chemisorbed oxygen, which improves the density of Brønsted and Lewis acid sites on the catalyst surface. Furthermore, the nitrated V2O5-WO3/TiO2 catalyst has a high NOX removal efficiency and N2 selectivity at low temperatures (i.e., 300 °C); this is because NO3- and chemisorbed oxygen, generated by nitrate treatment, facilitated the occurrence of a fast SCR reaction. The approach outlined in this study can be applied to a wide range of SCR catalysts, allowing for the development of more, low-temperature SCR catalysts.
© 2023 The Authors. Published by American Chemical Society.