Efficient alkaline hydrogen evolution electrodes must be used for hydrogen production in anion exchange membrane water electrolyzers (AEMWEs). Therefore, we fabricated a NiMnS catalyst with a Mn-rich surface, which was self-supported on Ti paper through one-step electrodeposition. Mn doping endowed the catalyst with a unique hollow morphology and lattice-distorted structure. Consequently, the NiMnS/Ti electrode exhibited a large number of exposed electrochemical surfaces and effective active sites and a high hydrogen evolution reaction (HER) activity. Specifically, in half-cell measurements, the NiMnS/Ti electrode exhibited an overpotential of 65 mV at 10 mA cm-2, which was lower than that of NiS/Ti (102 mV) and indicated its superior HER activity. When the proposed cathode was applied in an AEMWE single cell, the device achieved a high current density of up to 0.9 A cm-2 at a cell potential of 2.0 V.