Effects of additives on the performance of a laser-induced graphene sensor modified with ZrO2 nanoparticles for OP detection

Huiyang Xu; Chuang Guo; Weijian Yuan; Wenna Zhang; Qiu Sun; Jianfeng Wu; Xuelin Zhang

doi:10.1039/d3an01215h

Effects of additives on the performance of a laser-induced graphene sensor modified with ZrO₂ nanoparticles for OP detection

Analyst. 2023 Oct 5;148(20):5210-5220. doi: 10.1039/d3an01215h.

Authors

Huiyang Xu^{1

2}, Chuang Guo³, Weijian Yuan², Wenna Zhang¹, Qiu Sun¹, Jianfeng Wu⁴, Xuelin Zhang²

Affiliations

¹ School of Chemistry and Chemical Engineering, Harbin Institute of Technology, Harbin 150001, China. sunqiu@hit.edu.cn.
² School of Astronautics, Harbin Institute of Technology, Harbin 150001, China. zhangxuelin@hit.edu.cn.
³ Beijing Spacecrafts, Beijing, 100194, China.
⁴ State Key Laboratory of Toxicology and Medical Countermeasures and Laboratory of Toxicant Analysis, Institute of Pharmacology and Toxicology, Academy of Military Medical Sciences, Beijing 100850, China. ammswjf@hotmail.com.

PMID: 37724336
DOI: 10.1039/d3an01215h

Abstract

In this study, a simple and portable electrochemical sensor based on laser-induced graphene (LIG) has been developed to systematically investigate the feasibility of LIG as an electrode to detect organophosphorus pesticides (OPs). It proves that the LIG-based electrode has a relatively high electrochemically active surface area (ECSA) and heterogeneous electron transfer (HET) of 0.100 cm² and 0.000825 cm s^-1, respectively. In addition, zirconium dioxide nanoparticles (ZrO₂ NPs) have been modified on the electrode with three different binders, β-cyclodextrin (β-CD), chitosan (CS) and Nafion, to improve the adsorption capacity of the electrode toward OPs, and the effect of the binders on the performance of the as-fabricated sensor has been investigated in detail. The results show that β-CD increases not only the electrochemically active surface area of the electrode but also the redox peak current of methyl parathion (MP). To evaluate the sensitivity of the sensor, differential pulse voltammetry (DPV) curves have been tested in solutions containing different concentrations of MP using ZrO₂-β-CD/LIG as an electrode, which shows a detection range of 5-200 ng ml^-1 and a detection limit of 0.89 ng ml^-1. In summary, the LIG-based sensor has a low detection limit, high sensitivity and good interference resistance, and thus has tremendous potential for the detection of pesticides in the environment.