A new strategy integrating the straight synthesis of carbon dots (CDs) and their direct use for the determination of heavy metals by means of fluorescence quenching is presented. The proposal consists of a modular analyzer, which includes a low temperature co-fired ceramics (LTCC) microreactor for the synthesis of CDs and a cyclic olefin copolymer (COC) microfluidic platform, which automatically performs a reverse flow injection analysis (rFIA) protocol for the determination of heavy metal ions in water by CD fluorescence quenching. As a proof of concept, nitrogen-doped CDs were synthesized from acrylic acid and ethylenediamine (ED) with quantum yields (QYs) of up to 44%, which are selective to cobalt. With the described system, we synthesized homogeneous CDs without the need for further purification and with the minimum consumption of reagents, and optimized fluorescence measurements can be performed with freshly obtained luminescent nanomaterials that have not undergone decomposition processes. They have an average hydrodynamic diameter of 4.2 ± 0.9 nm and maximum excitation and emission wavelengths at 358 nm and 452 nm, respectively. The system allows the automatic dilution and buffering of the synthesized CDs and the sample prior to the determination of cobalt. The concentration of cobalt was determined with good sensitivity and a limit of detection of 7 μg·L-1 with a linear range of 0.02-1 mg·L-1 of Co2+. Spiked tap water and river water samples were analyzed, obtaining recovery from 98 to 104%. This demonstrates the potential of the equipment as an efficient on-site control system for heavy metal monitoring in water.
Keywords: Carbon dots; Cobalt determination; Fluorescence quenching; Microfluidics; Microreactor.
© 2023. The Author(s).