Thermal evaluation of plant biomass from the phytostabilisation of soils contaminated by potentially toxic elements

Abstract

The combination of phytoremediation of soils contaminated by potentially toxic elements with energy production by combustion of the generated biomass can be a sustainable land management option, combining the production of renewable bioenergy with soil restoration while minimising energy consumption and CO₂ emission. In this work, plant biomass from phytoremediation of soils contaminated by potentially toxic elements was studied as solid biofuel for combustion by thermal analysis and biomass composition. Six plant species were grown in two soils with differing degrees of contamination: Brassica juncea, Cynara cardunculus, Atriplex halimus, Nicotiana glauca, Dittrichia viscosa, Retama sphaerocarpa and Salvia rosmarinus. The composition of the plant biomass was characterised chemically and thermogravimetric analyses were performed for the mass loss (TG), derivative curves of mass loss (DTG) and temperature difference (DTA) signal. The cellulose concentration correlated with the parameters of the thermal analysis in the low temperature range (150-350 °C), while lignin correlated with the thermal parameters of the second peak in the high temperature range. Salvia rosmarinus and R. sphaerocarpa showed the best combustion characteristics according to the thermal profile and mineral residue results. The accumulation of potentially toxic elements in B. juncea grown in heavily contaminated soil led to a higher amount of residue at 750 °C, with a global activation energy lower than the one obtained when this species was grown in a soil with lower contamination. Therefore, the most beneficial combination of soil phytoremediation and energy production (combustion) that can be suggested would depend on the level of soil contamination: in heavily contaminated soil, phytostabilisation using R. sphaerocarpa and S. rosmarinus; in slightly contaminated soil, B. juncea due to its high energy of activation, although the concentrations of potentially toxic elements in the residue must be controlled, as well as possible particulate matter emissions during combustion.

Keywords: Activation energy; Cellulose; Derivative thermogravimetry; Higher heating value; Lignin; Thermogravimetric analysis.