Suppression of thermo-acoustic instabilities in horizontal Rijke tube using pulsating radial jets

Nilaj N Deshmukh; Afzal Ansari; Asim P Tajir; Craig C Almeida; Ankita S Shetty; N S Danie; Suchita K Kadam

doi:10.1016/j.mex.2023.102325

Suppression of thermo-acoustic instabilities in horizontal Rijke tube using pulsating radial jets

MethodsX. 2023 Aug 15:11:102325. doi: 10.1016/j.mex.2023.102325. eCollection 2023 Dec.

Authors

Nilaj N Deshmukh¹, Afzal Ansari¹, Asim P Tajir¹, Craig C Almeida¹, Ankita S Shetty¹, N S Danie¹, Suchita K Kadam²

Affiliations

¹ Department of Mechanical Engineering, Fr. C. Rodrigues Institute of Technology, Sector- 9A, Vashi, Navi Mumbai 400703, India.
² Ramrao Adik Institute of Technology, Nerul, Navi Mumbai 400 706, India.

Abstract

Thermo-acoustic instability has been observed in gas turbines, rocket engines, and aero-engines. Acoustic perturbations grow and change the characteristics of the flow due to instability. The present work describes the use of pulsating air jets to suppress the thermo-acoustic instabilities. In present study pulsatile micro-jets are placed downstream of the burner radially which breaks the coupling between acoustic waves and unsteady heat release. A microphone connected to LIFA (LabVIEW Interface for Arduino) was used to detect the sound pressure levels. By controlling the airflow rate of the pulsatile jets, the sound pressure levels were suppressed down to the background noise level using minimum energy and time. A closed-loop control system is developed for this purpose, which works on the feedback signal acquired from microphone. To simulate the one dimensional combustion phenomenon, an experimental setup called Rijke tube was used. The suppression was most effective for the pulsatile jets of 27-33 Hz pulsation frequency range and at a flow rate of 6.8 LPM. This control strategy effectively controlled the combustion instability of around 35-42 dB.•The closed loop control method is built on DAQ and Arduino using the LabVIEW interface for Arduino (LIFA).•Developed closed loop active control method was observed to be effective for suppression of thermo-acoustic instability.•Optimum position of the radial planes of micro-jets with respect to the burner was decided to improve the efficacy of the pulsatile jets towards suppression of thermo-acoustic instability.

Keywords: Active control; Closed-Loop Active Control Method for Suppression of Thermo-Acoustic Instabilityusing Pulsating Radial Jets; Pulsatile injection; Rijke tube; Thermo-acoustic instabilities.