Ferroelectric nanoparticles have attracted much attention for numerous electronic applications owing to their nanoscale structure and size-dependent behavior. Barium titanate (BTO) nanoparticles with two different sizes (20 and 100 nm) were synthesized and mixed with a polysiloxane (PSX) polymer forming a nanocomposite solution for high-k nanodielectric films. Transition from the ferroelectric to paraelectric phase of BTO with different nanoparticle dimensions was evaluated through variable-temperature X-ray diffraction measurement accompanied by electrical analysis using capacitor structures. A symmetric single 200 peak was constantly detected at different measurement temperatures for the 20 nm BTO sample, marking a stable cubic crystal structure. 100 nm BTO on the other hand shows splitting of 200/002 peaks correlating to a tetragonal crystal form which further merged, thus forming a single 200 peak at higher temperatures. Smaller BTO dimension exhibits clockwise hysteresis in capacitance-voltage measurement and correlates to a cubic crystal structure which possesses paraelectric properties. Bigger BTO dimension in contrast, demonstrates counterclockwise hysteresis owing to their tetragonal crystal form. Through further Rietveld refinement analysis, we found that the tetragonality (c/a) of 100 nm BTO decreases at a higher temperature which narrows the hysteresis window. A wider hysteresis window was observed when utilizing 100 nm BTO compared to 20 nm BTO even at a lower loading ratio. The present findings imply different hysteresis mechanisms for BTO nanoparticles with varying dimensions which is crucial in understanding the role of how the BTO size tunes the crystal structures for integration in thin-film transistor devices.
© 2023 The Authors. Published by American Chemical Society.