Lithium metal has generated significant interest as an anode material because of its high theoretical capacity. However, issues such as dendrite growth and lithium loss during cycling make this material incompatible with liquid electrolytes. Solid polymer electrolytes (SPE) have been proposed as replacements as they are non-flammable, resist dendrite growth, have decent ionic conductivity, and have low resistance with lithium metal. Passivation layers, which form on the lithium metal surface and are hence intrinsic to its chemical composition, are often overlooked. Residual quantities of atmospheric gases are present in lithium metal storage environments, making surface modification and its subsequent impact on anode reactivity inevitable. Moreover, the impact of this phenomenon in a realistic lithium metal anode (LMA) environment with SPE has not yet been extensively investigated. In this study, the impact of gas exposure on an LMA was investigated by exposing freshly cut lithium rods to O2, CO2, and N2. Passivation layers were characterized via X-ray photoelectron spectroscopy. The effect of passivation layer formation on LMA reactivity toward SPE was measured by exposing passivated samples to common SPE materials. The resultant interface was characterized using Raman spectroscopy. SPE-passivation layer reactivity was correlated to ageing by electrochemical impedance spectroscopy and kinetic charge transfer via galvanostatic linear polarization at the LMA-SPE interface in symmetric Li─SPE─Li stacks. This study revealed that the chemical composition of the passivation layer affects LMA reactivity toward SPE and electrochemical performance. A thorough characterization of the lithium metal passivation layer is essential to understanding the fundamental factors affecting solid-state lithium metal battery performance.
Keywords: all-solid-state battery; lithium metal; passivation layer; solid polymer electrolyte; solid-state interface; storage conditions.