Enhanced Electrochemical Performance of Disordered Rocksalt Cathodes Enabled by a Graphite Conductive Additive

ACS Appl Mater Interfaces. 2023 Aug 23;15(33):39253-39264. doi: 10.1021/acsami.3c05619. Epub 2023 Aug 11.

Abstract

Cobalt-free cation-disordered rocksalt (DRX) cathodes are a promising class of materials for next-generation Li-ion batteries. Although they have high theoretical specific capacities (>300 mA h/g) and moderate operating voltages (∼3.5 V vs Li/Li+), DRX cathodes typically require a high carbon content (up to 30 wt %) to fully utilize the active material which has a detrimental impact on cell-level energy density. To assess pathways to reduce the electrode's carbon content, the present study investigates how the carbon's microstructure and loading (10-20 wt %) influence the performance of DRX cathodes with the nominal composition Li1.2Mn0.5Ti0.3O1.9F0.1. While electrodes prepared with conventional disordered carbon additives (C65 and ketjenblack) exhibit rapid capacity fade due to an unstable cathode/electrolyte interface, DRX cathodes containing 10 wt % graphite show superior cycling performance (e.g., reversible capacities ∼260 mA h/g with 85% capacity retention after 50 cycles) and rate capability (∼135 mA h/g at 1000 mA/g). A suite of characterization tools was employed to evaluate the performance differences among these composite electrodes. Overall, these results indicate that the superior performance of the graphite-based cathodes is largely attributed to the: (i) formation of a uniform graphitic coating on DRX particles which protects the surface from parasitic reactions at high states of charge and (ii) homogeneous dispersion of the active material and carbon throughout the composite cathode which provides a robust electronically conductive network that can withstand repeated charge-discharge cycles. Overall, this study provides key scientific insights on how the carbon microstructure and electrode processing influence the performance of DRX cathodes. Based on these results, exploration of alternative routes to apply graphitic coatings is recommended to further optimize the material performance.

Keywords: carbon additives; cation-disordered rocksalt (DRX); coating; high capacity; lithium-ion battery cathodes.