This work presents the efficient, green, and low-cost preparation of calcium lactate by using bivalve-shell wastes (cockle, mussel, and oyster shells) as raw materials. Three bivalve shells, a cockle, mussel, and oyster, were used separately as an alternative calcium-source material for the preparation of calcium lactate. The bivalve-shell waste was cleaned and milled, obtaining calcium carbonate (CaCO3) powder, which reacted to the lactic acid, forming calcium lactate. The effects of different calcium sources (cockle, mussel, and oyster) and different lactic acid concentrations (6, 8, and 10 mol/L) on the physicochemical properties of the synthesized calcium lactates were then investigated. The results pointed out that the highest solubility of the product was observed when 6 mol/L lactic acid and cockle-shell derived CaCO3 were employed for the calcium lactate preparation. The thermal decompositions of all calcium lactates occurred in three processes: dehydration, ethyl-lactate elimination, and decarbonization, respectively. The results, obtained from an infrared spectrometer, X-ray diffractometer, thermogravimetric analyzer, and scanning electron microscope, confirmed the formation of calcium lactate pentahydrate (Ca(CH3CHOHCOO)2·5H2O). The diffractograms also indicated the presence of two enantiomers of Ca(CH3CHOHCOO)2·5H2O, namely, of dl- and l-enantiomers, which depended on the lactic acid concentration used in the preparation process. The morphologies of calcium lactates show the firewood-like crystals in different microsizes, together with smaller irregular crystals. In summary, this work reports an effective process to prepare the valuable calcium lactates by using the cheap bivalve-shell-derived CaCO3 as a renewable calcium source.
© 2023 The Authors. Published by American Chemical Society.