Achieving satisfactory performance for a solid-state Na-metal battery (SSNMB) with an inorganic solid electrolyte (SE), especially under freezing temperatures, poses a challenge for stabilizing a Na-metal anode. Herein, this challenge is addressed by utilizing a Natrium super ionic conductor (NASICON) NASICON-type solid electrolyte, enabling the operation of a rechargeable SSNMB over a wide temperature range from -20 to 45 °C. The interfacial resistance at the Na metal/SE interface is only 0.4 Ω cm2 at 45 °C and remains below 110 Ω cm2 even at -20 °C. Remarkably, long-term Na-metal plating/stripping cycles lasting over 2000 h at -20 °C are achieved with minimal polarization voltages at 0.1 mA cm-2 . Further analysis reveals the formation of a uniform Na3- x Cax PO4 interphase layer at the interface, which significantly contributes to the exceptional interfacial performance observed. By employing a Na3 V1.5 Al0.5 (PO4 )3 cathode, the full battery system demonstrates excellent adaptability to low temperatures, exhibiting a capacity of 80 mA h g-1 at -20 °C over 50 cycles and retaining a capacity of 108 mAh g-1 (88.5% of the capacity at 45 °C) at 0 °C over 275 cycles. This research significantly reduces the temperature threshold for SSNMB operation and paves the way toward solid-state batteries suitable for all-season applications.
Keywords: NASICON-type solid electrolyte; Na-metal batteries; interfacial resistance; low-temperature operation.
© 2023 The Authors. Advanced Science published by Wiley-VCH GmbH.