Co-gasification of rural solid waste and biomass in rural areas: Simulation and plant-scale process

Abstract

Co-gasification technology is considered to be one of the most potential technologies for solid waste treatment, and the co-gasification treatment of rural solid waste (RSW) and biomass can effectively promote waste reduction and resource utilization. In the present study, the co-gasification of RSW and biomass in an updraft fixed bed gasifier was simulated using the Aspen Plus software, where the simulation results were validated via plant-scale experiments. In this scenario, the impacts of biomass source (i.e., rice husk, rice straw, tree bark and corn straw), co-gasification ratio (CGR) (0-40%) and air equivalence ratio (AER) (0.30-0.55) on the performance of the fixed-bed were investigated. Results showed that Aspen Plus could describe the plant-scale co-gasification process well. Besides, the tree bark-RSW system had the highest heat conversion efficiency of 6.00 MJ/kg the simulation temperature of the gasification layer increased greatly from 485 to 913 °C when the AER increased from 0.40 to 0.55. In addition, the co-gasification of RSW and tree bark could achieve the highest efficiency at the AER of 0.45 and CGR of 20% w, in which the gasification temperature reached 799 °C with the gasification efficiency of 57.17%. This study explored the use of co-gasification of RSW and biomass in rural areas by simulation and plant-scale processes, which promotes the commercial application of co-gasification technology and contributes to sustainable waste management in rural areas.

Keywords: Aspen Plus®; Co-gasification; Lignocellulosic biomass; Plant-scale; Rural solid waste.