Froth treatment tailings are one type of waste stream generated during the extraction of surface-mined oil sands bitumen. To remove water and solids from bitumen froth recovered during the water-based extraction process, hydrocarbon diluent is added, and settling and/or centrifugation are applied to the diluted bitumen froth, producing diluted bitumen and froth treatment tailings. While recovery processes are in place to remove and recycle the diluent from froth treatment tailings, some residual diluent can remain. Since tailings are stored in outdoor ponds, the residual diluent can have implications for methanogenic microbial processes and resulting greenhouse gas emissions. This work presents a methodology to accurately extract and quantify diluent hydrocarbons from froth treatment tailings using gas chromatography. A cold-start temperature program is used to separate diluent hydrocarbons from any residual bitumen in the sample, and diluent is quantified using commercial standards as well as unprocessed diluent. A series of extraction parameters were tested and results from multiple conditions are shown with a rationale for the selected optimized parameters. Quantification of diluent in tailings samples is demonstrated from 60 to 5329 μg/g, and results from quality control standards show an average diluent recovery of 100 ± 10%.
Keywords: diluent; extraction; gas chromatography; hydrocarbons; tailings.
© 2023 Wiley-VCH GmbH.