The production of hydrogen peroxide (H2 O2 ) is a key parameter for the performance of pulsed discharges submerged in water utilized as advanced oxidation process. So far, any related assessment of the underlying mechanism was conducted for the application of several hundred discharges, which did not allow for a correlation with physical processes. Moreover, the production was rarely investigated depending on water conductivity as one of the most important parameters for the development of submerged discharges. Accordingly, hydrogen peroxide generation was investigated here for individual single discharge events instigated with 100 ns high-voltage pulses in water with three different conductivities and was associated with the discharge development, i. e. spatial expansion and dissipated electrical energy. The approach necessitated the improvement of an electrochemical flow injection analysis based on the reaction of Prussian blue with H2 O2 . Hydrogen peroxide concentrations were quadratically increasing with propagation time and stable for different water conductivities. H2 O2 production per unit volume of a discharge was constant over time with an estimated rate constant of 3.2 mol ⋅ m-1 s-1 , averaged over the crosssectional area of all discharge filaments. However, the individually dissipated energy increased with conductivity, hence, the production efficiency decreased from 6.1 g ⋅ kWh-1 to 1.4 g ⋅ kWh-1 , which was explained by increased resistive losses within the bulk liquid.
Keywords: advanced oxidation process; plasma chemistry; plasma in liquids; pulsed power; water chemistry.
© 2023 The Authors. ChemPhysChem published by Wiley-VCH GmbH.