Traditional remediation technologies cannot well remediate the low permeability contaminated stratums due to the limitation in the transport capacity of solute. The technology that integrates the fracturing and/or slow-released oxidants can be a new alternative, and its remediation efficiency remains unknown. In this study, an explicit dissolution-diffusion solution for the oxidants in control release beads (CRBs) was developed to describe the time-varying release of oxidants. Together with advection, diffusion, dispersion and the reactions with oxidants and natural oxidants, a two-dimensional axisymmetric model of solute transport in a fracture-soil matrix system was established to compare the removal efficiencies of CRB oxidants and liquid oxidants and to identify the main factors that can significantly affect the remediation of fractured low-permeability matrix. The results show that CRB oxidants can achieve a more effective remediation than liquid oxidants under the same condition due to the more uniform distribution of oxidants in the fracture and hence a higher utilization rate. Increasing the dose of the embedded oxidants can benefit the remediation to some extent, while at small doses the release time over 20 d has little impact. For extremely low-permeability contaminated stratums, the remediation effect can be significantly improved if the average permeability of the fractured soil can be enhanced to more than 10-7 m/s. Increasing the injection pressure at a single fracture during the treatment can enlarge the influence distance of the slow-released oxidants above the fracture (e.g., 0.3-0.9 m in this study) rather than below the fracture (e.g., 0.3 m in this study). In general, this work is expected to provide some meaningful guidance for the design of fracturing and remediating low permeability contaminated stratums.
Keywords: Enhanced delivery; Fracture; In-situ chemical oxidation; Low-permeability matrix; Slow-released oxidants.
Copyright © 2023 Elsevier Ltd. All rights reserved.