Internet of Things (IoT) systems cooperative with unmanned aerial vehicles (UAVs) have been put into use for more than ten years, from transportation to military surveillance, and they have been shown to be worthy of inclusion in the next wireless protocols. Therefore, this paper studies user clustering and the fixed power allocation approach by placing multi-antenna UAV-mounted relays for extended coverage areas and achieving improved performance for IoT devices. In particular, the system enables UAV-mounted relays with multiple antennas together with non-orthogonal multiple access (NOMA) to provide a potential way to enhance transmission reliability. We presented two cases of multi-antenna UAVs such as maximum ratio transmission and the best selection to highlight the benefits of the antenna-selections approach with low-cost design. In addition, the base station managed its IoT devices in practical scenarios with and without direct links. For two cases, we derive closed-form expressions of outage probability (OP) and closed-form approximation ergodic capacity (EC) generated for both devices in the main scenario. The outage and ergodic capacity performances in some scenarios are compared to confirm the benefits of the considered system. The number of antennas was found to have a crucial impact on the performances. The simulation results show that the OP for both users strongly decreases when the signal-to-noise ratio (SNR), number of antennas, and fading severity factor of Nakagami-m fading increase. The proposed scheme outperforms the orthogonal multiple access (OMA) scheme in outage performance for two users. The analytical results match Monte Carlo simulations to confirm the exactness of the derived expressions.
Keywords: AF; NOMA; UAV; ergodic capacity; maximum ratio transmission; outage probability.