We propose an algorithm for generating a panoramic image of a pipe's inner surface based on inverse perspective mapping (IPM). The objective of this study is to generate a panoramic image of the entire inner surface of a pipe for efficient crack detection, without relying on high-performance capturing equipment. Frontal images taken while passing through the pipe were converted to images of the inner surface of the pipe using IPM. We derived a generalized IPM formula that considers the slope of the image plane to correct the image distortion caused by the tilt of the plane; this IPM formula was derived based on the vanishing point of the perspective image, which was detected using optical flow techniques. Finally, the multiple transformed images with overlapping areas were combined via image stitching to create a panoramic image of the inner pipe surface. To validate our proposed algorithm, we restored images of pipe inner surfaces using a 3D pipe model and used these images for crack detection. The resulting panoramic image of the internal pipe surface accurately demonstrated the positions and shapes of cracks, highlighting its potential utility for crack detection using visual inspection or image-processing techniques.
Keywords: image stitching; inverse perspective mapping; optical flow; pipe inspection.