In the present study, we report the chemical modification of the dried and fallen pine needles (PNs) via a simple protocol using KMnO4 oxidation. The oxidized PNs (OPNs) were evaluated as adsorbents using some cationic and anionic dyes. The successful synthesis of OPNs adsorbent was characterized by various techniques to ascertain its structural attributes. The adsorbent showed selectivity for the cationic dyes with 96.11% removal (Pr) for malachite green (MG) and 89.68% Pr for methylene blue (MB) in 120 min. Kinetic models namely, pseudo-first order, pseudo-second order, and Elovich were applied to have insight into adsorption. Additionally, three adsorption isotherms, i.e., Langmuir, Freundlich, and Temkin were also applied. The dye adsorption followed a pseudo-second-order kinetic model with R2 > 0.99912 for MG and R2 > 0.9998 for MB. The adsorbent followed the Langmuir model with a maximum adsorption capacity (qm) of 223.2 mg/g and 156.9 mg/g for MG and MB, respectively. Furthermore, the OPNs showed remarkable regeneration and recyclability up to nine adsorption-desorption cycles with appreciable adsorption for both the dyes. The use of OPNs as an adsorbent for the removal of dyes from wastewater, therefore, provides an ecologically benign, low-cost, and sustainable solution.
Keywords: Dye; KMnO4; Lignocellulosic biomass; oxidation; reusability; wastewater treatment.
We have carried out the chemical modification of the dried and fallen pine needles (PNs) via a simple protocol using KMnO4 oxidation. The oxidized PNs (OPNs) were evaluated as adsorbents using some cationic and anionic dyes and the adsorbent showed selectivity for the cationic dyes. As far as the authors are aware, no such report has been documented in the literature wherein an adsorbent based on oxidized PNs with a simple protocol has been used for dye removal.