WTe2, a low-symmetry transition metal dichalcogenide, has broad prospects in functional device applications due to its excellent physical properties. When WTe2 flake is integrated into practical device structures, its anisotropic thermal transport could be affected greatly by the substrate, which matters a lot to the energy efficiency and functional performance of the device. To investigate the effect of SiO2/Si substrate, we carried out a comparative Raman thermometry study on a 50 nm-thick supported WTe2 flake (with κzigzag = 62.17 W·m-1·K-1 and κarmchair = 32.93 W·m-1·K-1), and a suspended WTe2 flake of similar thickness (with κzigzag = 4.45 W·m-1·K-1, κarmchair = 4.10 W·m-1·K-1). The results show that the thermal anisotropy ratio of supported WTe2 flake (κzigzag/κarmchair ≈ 1.89) is about 1.7 times that of suspended WTe2 flake (κzigzag/κarmchair ≈ 1.09). Based on the low symmetry nature of the WTe2 structure, it is speculated that the factors contributing to thermal conductivity (mechanical properties and anisotropic low-frequency phonons) may have affected the thermal conductivity of WTe2 flake in an uneven manner when supported on a substrate. Our findings could contribute to the 2D anisotropy physics and thermal transport study of functional devices based on WTe2 and other low-symmetry materials, which helps solve the heat dissipation problem and optimize thermal/thermoelectric performance for practical electronic devices.
Keywords: electrical-heating Raman thermometry; laser-heating Raman thermometry; substrate coupling; thermal anisotropy.