Reconstructing 3D human pose and shape from a single image and sparse IMUs

Xianhua Liao; Jiayan Zhuang; Ze Liu; Jiayan Dong; Kangkang Song; Jiangjian Xiao

doi:10.7717/peerj-cs.1401

Reconstructing 3D human pose and shape from a single image and sparse IMUs

PeerJ Comput Sci. 2023 May 24:9:e1401. doi: 10.7717/peerj-cs.1401. eCollection 2023.

Authors

Xianhua Liao^#¹, Jiayan Zhuang^#², Ze Liu³, Jiayan Dong², Kangkang Song², Jiangjian Xiao²

Affiliations

¹ School of Information Science and Engineering, Ningbo University, Ningbo, China.
² Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo, China.
³ School of Mechanical Engineering, Zhejiang University of Technology, Hangzhou, China.

^# Contributed equally.

Abstract

Model-based 3D pose estimation has been widely used in many 3D human motion analysis applications, in which vision-based and inertial-based are two distinct lines. Multi-view images in a vision-based markerless capture system provide essential data for motion analysis, but erroneous estimates still occur due to ambiguities, occlusion, or noise in images. Besides, the multi-view setting is hard for the application in the wild. Although inertial measurement units (IMUs) can obtain accurate direction without occlusion, they are usually susceptible to magnetic field interference and drifts. Hybrid motion capture has drawn the attention of researchers in recent years. Existing 3D pose estimation methods jointly optimize the parameters of the 3D pose by minimizing the discrepancy between the image and IMU data. However, these hybrid methods still suffer from the issues such as complex peripheral devices, sensitivity to initialization, and slow convergence.

Methods: This article presents an approach to improve 3D human pose estimation by fusing a single image with sparse inertial measurement units (IMUs). Based on a dual-stream feature extract network, we design a model-attention network with a residual module to closely couple the dual-modal feature from a static image and sparse inertial measurement units. The final 3D pose and shape parameters are directly obtained by a regression strategy.

Results: Extensive experiments are conducted on two benchmark datasets for 3D human pose estimation. Compared to state-of-the-art methods, the per vertex error (PVE) of human mesh reduces by 9.4 mm on Total Capture dataset and the mean per joint position error (MPJPE) reduces by 7.8 mm on the Human3.6M dataset. The quantitative comparison demonstrates that the proposed method could effectively fuse sparse IMU data and images and improve pose accuracy.

Keywords: 3D human pose and shape; A single image with sparse inertial measurement units; Dual-stream feature extract network; Model-attention network with a residual module; Regression.

Grants and funding

This work is supported by the Ningbo Science and Technology Innovation Project (No.2021Z013). The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.