Over the past few years, biodegradable ceramic scaffolds have gained significant attention in the field of bone repair. Calcium phosphate (Ca3(PO4)2)- and magnesium oxide (MgO)-based ceramics are biocompatible, osteogenic, and biodegradable, making them attractive for potential applications. However, the mechanical properties of Ca3(PO4)2 are limited. We developed a magnesium oxide/calcium phosphate composite bio-ceramic scaffold characterized by a high melting point difference, using vat photopolymerization (VP) technology to address this issue. The primary goal was to fabricate high-strength ceramic scaffolds using biodegradable materials. In this study, we investigated ceramic scaffolds with varying MgO contents and sintering temperatures. We also discussed the co-sintering densification mechanism of high and low melting-point materials associated with composite ceramic scaffolds. During sintering, a liquid phase was generated, which filled up the pores generated during the vaporization of additives (such as resin) under the influence of capillary force. This led to an increase in the extent of ceramic densification realized. Moreover, we found ceramic scaffolds with 80 wt% MgO exhibited the best mechanical performance. This kind of composite scaffold performed better than pure MgO scaffold. The results reported herein highlight that high-density composite ceramic scaffolds can be potentially used in the field of bone repair.
Keywords: Composite ceramic scaffold; High-melting-point-difference; Mechanical property; Sintering densification mechanism.
Copyright © 2023 Elsevier Ltd. All rights reserved.