Oxygen impurities play a crucial role in the glass-forming ability and crystallisation behaviour of metallic glasses. In the present work, single laser tracks were produced on Zr59.3-xCu28.8 Al10.4Nb1.5Ox substrates (x = 0.3, 1.3) to study the redistribution of oxygen in the melt pool under laser melting, which provides the basis for laser powder bed fusion additive manufacturing. Since such substrates are commercially not available, they were fabricated by arc melting and splat quenching. X-ray diffraction revealed that the substrate with 0.3 at.% oxygen was X-ray amorphous, while the substrate with 1.3 at.% oxygen was partially crystalline. Hence, it is evident that the oxygen content affects the crystallisation kinetics. Subsequently, single laser tracks were produced on the surface of these substrates, and the melt pools attained from the laser processing were characterised by atom probe tomography and transmission electron microscopy. Surface oxidation and subsequent convective flow redistribution of oxygen by laser melting were identified as causes of the presence of CuOx and crystalline ZrO nanoparticles in the melt pool. Bands of ZrO likely originate from surface oxides that were moved deeper into the melt pool by convective flow. The findings presented here highlight the influence of oxygen redistribution from the surface into the melt pool during laser processing.
Keywords: atom probe tomography; bulk metallic glass; oxygen contamination; single laser tracks; surface oxides; transmission electron microscopy.