Resource recovery from RO concentrate using nanofiltration: Impact of active layer thickness on performance

Abstract

Modelling the removal of monovalent and divalent ions from seawater via nanofiltration is crucial for pre-treatment in seawater reverse osmosis systems. Effective separation of divalent ions through nanofiltration and allowing the permeate containing only monovalent ions to pass through the reverse osmosis system produces pure NaCl salt from the concentrate. However, the Donnan steric pore model and dielectric exclusion assume a uniformly distributed cylinder pore morphology, which is not representative of the actual membrane structure. This study analyzed the impact of membrane thickness on neutral solute removal and investigated the effect of two different methods for calculating the Peclet number on rejection rates of monovalent and divalent salts. Results show that membrane thickness has a significant effect on rejection rates, particularly for uncharged solutes in the range of 0.5-0.7 solute radius to membrane pore size ratio. Operating pressures above 10 bar favour the use of effective active layer thickness over the membrane pore size to calculate the Peclet number. At low pressures, using the effective active layer can lead to overestimation of monovalent salt rejection and underestimation of divalent salt rejection. This study highlights the importance of appropriate Peclet number calculation methods based on applied pressure when modelling membrane separation performance.

Keywords: Donnan steric pore model and dielectric exclusion; Effective active layer thickness; Membrane pore size; Nanofiltration; Peclet number; Rejection rate.