Photonic crystal fiber (PCF) embedded with functional materials has demonstrated diverse applications ranging from ultrafast lasers, optical communication to chemical sensors. Many efforts have been made to fabricating carbon nanotube (CNT) based optical fibers by ex situ transfer method; however, often suffer poor uniformity and coverage. Here, the direct growth of CNTs on the inner walls of PCFs by the chemical vapor deposition (CVD) method is reported. A two-step growth method is developed to control the narrow diameter distribution of CNTs to ensure desirable nanotube optical transitions. In the as-fabricated CNT- embedded fiber, third-harmonic generation (THG) has been enhanced by ≈15 times compared with flat CNT film on fused silica. A dual-wavelength all-fiber mode-locked ultrafast laser (≈1561 and ≈1064 nm) is further demonstrated by integrating the 1.36±0.15 nm-diameter CNTs into two kinds of photonic bandgap hollow core PCF (named HC-1550 and HC-1060) as saturable absorbers, using their S11 (≈0.7 eV) and S22 (≈1.2 eV) interband transition respectively. The fiber laser shows stable output of ≈10 mW, ≈800 fs pulse width, and ≈71 MHz repetition rate at 1561 nm wavelength. These results can enable the large-scale applications of CNTs in PCF-based optical devices.
Keywords: carbon nanotube; chemical vapor deposition; diameter control; mode-locked fiber laser; photonic crystal fiber; third-harmonic generation.
© 2023 Wiley-VCH GmbH.