Physical and chemical properties of PM1 in Delhi: A comparison between clean and polluted days

Sci Total Environ. 2023 Sep 20:892:164266. doi: 10.1016/j.scitotenv.2023.164266. Epub 2023 May 22.

Abstract

Considering the significance of PM1 aerosol in assessing health impacts of air pollution, an extensive analysis of PM1 samples collected at an urban site in Delhi is presented in this study. Overall, PM1 contributed to about 50 % of PM2.5 mass which is alarming especially in Delhi where particle mass loadings are usually higher than prescribed limits. Major portion of PM1 consisted of organic matter (OM) that formed nearly 47 % of PM1 mass. Elemental carbon (EC) contributed to about 13 % of PM1 mass, whereas SO42- (16 %), NH4+ (10 %), NO3- (4 %) and Cl- (3 %) were the major inorganic ions present. Sampling was performed in two distinctive campaign periods (in terms of meteorological conditions and heating (fire) activities), during the year 2019, each spanning two-week time, i.e. (i) September 3rd-16th (clean days), and (ii) November 22nd-December 5th (polluted days). Additionally, PM2.5 and black carbon (BC) were measured simultaneously for subsequent analysis. The 24-h averaged mean concentrations of PM2.5 and BC during clean days (polluted days) were 70.6 ± 26.9 and 3.9 ± 1.0 μg m-3 (196 ± 104 and 7.6 ± 4.1 μg m-3), respectively, which were systematically lower (higher) than that of the annual mean (taken from studies conducted at same site in 2019) of 142 and 5.7 μg m-3, respectively. Changes in characteristic ratios (i.e., organic carbon (OC)/elemental carbon (EC) and K+/EC) of chemical species detected in PM1 show an increase in biomass emissions during polluted days. Increase in biomass emission can be attributed to increase in heating practices (burning of biofuels such as wood logs, straw, and cow-dung cake) in- and around- Delhi because of fall in temperature during second campaign. Furthermore, a significant increase in NO3- fraction of PM1 is observed during second campaign which shows fog processing of NOX due to conducive meteorological conditions in winters. Also, comparatively stronger correlation of NO3- with K+ during second campaign (r = 0.98 as compared to r = 0.5 during first campaign) suggests the increased heating practices to be a contributing factor for increased fraction of NO3- in PM1. We observed that during polluted days, meteorological parameters such as dispersion rate also played a major role in intensifying the impact of increased local emissions due to heating activities. Apart from this, change in the direction of regional emission transport to study site and the topology of Delhi are the possible reasons for the elevated pollution level, especially PM1 during winter in Delhi. This study also suggests that black carbon measurement techniques used in current study (optical absorbance with heated inlet and evolved carbon techniques) can be used as reference techniques to determine the site-specific calibration constant of optical photometers for urban aerosol.

Keywords: Black carbon; Chemical characterization; Elemental carbon; Meteorology; Organic carbon; PM(1).

MeSH terms

  • Aerosols / analysis
  • Air Pollutants* / analysis
  • Carbon / analysis
  • Environmental Monitoring
  • India
  • Particulate Matter* / analysis
  • Seasons
  • Soot / analysis

Substances

  • Particulate Matter
  • Air Pollutants
  • Aerosols
  • Carbon
  • Soot