Microplastic particles (MP) are an emerging contaminant threatening many aquatic systems. Because of the sharp increase in plastic manufacture, the concentration of MP in natural ecosystems has grown dramatically. While it is known that when MP enter aquatic ecosystems they are transported and dispersed via different mechanisms (currents, waves, turbulence), the processes involved are still poorly understood. In the current study, the transport of MP by a unidirectional flow has been investigated in a laboratory flume. MP enter the system through a plume that can (or not) have suspended sediment. The interaction between MP and sediment was studied for three different MP particle types (Polyamide (PA) and Polyvinyl Chloride (PVC) fragments, and Polyethylene Terephthalate (PET) fibers), and four different sediment concentrations (0 g/l, 15 g/l, 30 g/l and 45 g/l). In all cases, sediment increased the vertical transport of MP to the bottom. The greater the sediment concentration, the greater the downward flux of MP. Sediment particles scavenged PA fragments downwards at the highest rate, followed by PET fibers and finally PVC fragments. These results indicate that a sediment particle-laden plume carrying MP may induce a differential settling of MP as they are advected. The scavenging of MP by sediments may result in sedimentation segregated patterns, with MP being found at shorter distances than expected for the case without sediment, therefore increasing the presence of MP near their contaminant sources.
Keywords: Plastic fibers; Plastic fragments; Scavenging; Sediment interaction; Sedimentation rate; Shallow aquatic system.
Copyright © 2023 The Authors. Published by Elsevier B.V. All rights reserved.