In this study, three-dimensional (3D) bioactive glass/lignocellulose (BG/cellulose) composite scaffolds were successfully fabricated by the 3D-bioprinting technique with N-methylmorpholine-N-oxide (NMMO) as the ink solvent. The physical structure, morphology, mechanical properties, hydroxyapatite growth and cell response to the prepared BG/cellulose scaffolds were investigated. Scanning electron microscopy (SEM) images showed that the BG/cellulose scaffolds had uniform macropores of less than 400 μm with very rough surfaces. Such BG/cellulose scaffolds have excellent mechanical performance to resist compressive force in comparison with pure cellulose scaffolds and satisfy the strength requirement of human trabecular bone (2-12 MPa). Furthermore, BG significantly increased the excellent hydroxyapatite-forming capability of the cellulose scaffolds as indicated by the mineralization of the scaffolds in simulated body fluid (SBF). The BG/cellulose scaffolds showed low cytotoxicity to human bone marrow mesenchymal stem cells (hBMSCs) in the CCK8 assay. The cell viability reached maximum (percent of the control group) when the weight ratio of cellulose to BG was 2 in the scaffold. Therefore, the 3D-printed BG/cellulose scaffolds show a potential application in the field of bone tissue engineering.
Keywords: 3D printing; bioactive glass; biocompatibility; biomaterials; bone tissue engineering scaffold; lignocellulose.