Transdermal drug delivery is a new means of delivering drugs through the skin to achieve therapeutic effects. Microneedles have several advantages, including low cost, easy self-administration, and high delivery efficiency. Different polymers affect the morphology, mechanical properties, and drug delivery efficiency of microneedles. To study the performance and limitations of microneedles (MNs), we prepared different ratios of polymers. MNs were fabricated from polyvinylpyrrolidone (PVP) and sodium carboxymethyl cellulose (CMC-Na) using the centrifugal molding method. Needle morphology, formability, and other properties of the polymers were evaluated to compare the performances of MNs with different ratios. PVP and CMC-Na were intermixed at different ratios with water as the solvent. The soluble MNs were prepared by mold casting. The morphology, thermodynamic properties, and crystallinity were studied using scanning electron microscopy (SEM), thermogravimetric analysis (TG), differential scanning calorimetric analysis (DSC), and X-ray diffraction (XRD). The results showed that composite microneedles have good thermal stability. Among the different compositions tested, the 10% PVP/2% CMC-Na composite microneedle demonstrated the best performance with a regular surface morphology and relatively high thermal decomposition and melting temperatures. These results indicate that microneedles with appropriate ratios of two different materials possess good formability and other properties.
Keywords: composite material; dissolving microneedle; properties.