Unconventional hydrocarbon assets represent a rapidly expanding proportion of North American oil and gas production. Similar to the incipient phase of conventional oil production at the turn of the twentieth century, there are ample opportunities to improve production efficiency. In this work we demonstrate that pressure dependent permeability degradation exhibited by unconventional reservoir materials is due to the mechanical response of a few commonly encountered microstructural constituents. In particular, the mechanical response of unconventional reservoir materials may be conceptualized as the superposed deformation of matrix (or ~ cylindrical/spherical), and compliant (or slit) pores. The former are representative of pores in a granular medium or a cemented sandstone, while the latter represent pores in an aligned clay compact or a microcrack. As a result of this simplicity, we demonstrate that permeability degradation is accounted for through a weighted superposition of conventional permeability models for these pore architectures. This approach permits us to conclude that the most severe pressure dependence is due to imperceptible bedding parallel delamination cracks in the oil bearing argillaceous (clay-rich) mudstones. Finally, we demonstrate that these delaminations tend to populate layers that are enriched with organic carbon. These findings are a basis for improving recovery factors through the development of new completion techniques to exploit, then mitigate pressure dependent permeability in practice.
© 2023. The Author(s).