Micro-bubble aeration is an efficient way to promote ozonation performance, but the technology is challenged by extensive energy cost. Here, a ceramic ultrafiltration membrane was used to achieve ozone micro-bubble (0-80 µm) aeration in a simple way at gaseous pressures of 0.14-0.19 MPa. Compared with milli-bubble aeration, micro-bubble aeration increased the equilibrium aquatic O3 concentrations by 1.53-3.25 times and apparent O3 transfer rates by 3.12-3.35 times at pH 5.0-8.0. Consequently, the •OH yield was 2.67-3.54 times via faster O3 transfer to the aquatic solution followed by decomposition rather than interfacial reaction. Ozone micro-bubble aeration outperformed milli-bubble aeration, with the degradation kinetics of 2,4-D being 3.08-4.36 times higher. Both O3-oxidation and •OH oxidation were important to the promotion with the contributions being 35.8%-45.9% and 54.1%-64.2%, respectively. The operational and water matric conditions influenced the oxidation performance via both O3 oxidation and •OH oxidation, which is reported for the first time. In general, the ceramic membrane offered a low-energy approach of ozone micro-bubble aeration for efficient pollutant degradation. The O3 oxidation and •OH oxidation were proportionally promoted by ozone micro-bubble due to O3 transfer enhancement. Thus, the promotive mechanism can be interpreted as the synchronous enchantment on ozone exposure and •OH exposure for the first time.
Keywords: (•)OH yield; Micro-bubble aeration, O(3) transfer; Oxidation performance; Ozone.
Copyright © 2023. Published by Elsevier Ltd.