Current conductive polymers win wide applications in smart strain-stress sensors, bioinspired actuators, and wearable electronics. This work investigates a novel strain sensor by using conductive polypyrrole (PPy) nanoparticles coated polyvinyl alcohol (PVA) fibers as matrix. The flexible, water-resistant PVA fibers are initially prepared by combined electrospinning and annealing techniques, and then are coated with PPy nanoparticles through in situ polymerization. The resultant PPy@PVA fibers exhibit stable, favorable electrical conductivities due to the uniform point-to-point connections among PPy nanoparticles, e.g. after three-time' polymerizations, the PPy@PVA3 fiber film presents a sheet resistance of ≈840 Ω sq-1 and a bulk conductivity of ≈32.1 mS cm-1 . Cyclic sensing tests reveal that, PPy@PVA sensors show linear relationships between the relative resistance variations and the applied strains, e.g. the linear deviation of PPy@PVA3 is only 0.9 % within 33 % strain. After long-term stretching/releasing cycles, the PPy@PVA sensor exhibits stable, durable, and reversible sensing behaviors, no evident "drift" is observed over 1,000 cycles (5,000 seconds).
Keywords: conductive polymers; electrospun fibers; polypyrrole; polyvinyl alcohol; strain sensors.
© 2023 Wiley-VCH GmbH.