Medial knee contact force (MCF) is related to the pathomechanics of medial knee osteoarthritis. However, MCF cannot be directly measured in the native knee, making it difficult for therapeutic gait modifications to target this metric. Static optimization, a musculoskeletal simulation technique, can estimate MCF, but there has been little work validating its ability to detect changes in MCF induced by gait modifications. In this study, we quantified the error in MCF estimates from static optimization compared to measurements from instrumented knee replacements during normal walking and seven different gait modifications. We then identified minimum magnitudes of simulated MCF changes for which static optimization correctly identified the direction of change (i.e., whether MCF increased or decreased) at least 70% of the time. A full-body musculoskeletal model with a multi-compartment knee and static optimization was used to estimate MCF. Simulations were evaluated using experimental data from three subjects with instrumented knee replacements who walked with various gait modifications for a total of 115 steps. Static optimization underpredicted the first peak (mean absolute error = 0.16 bodyweights) and overpredicted the second peak (mean absolute error = 0.31 bodyweights) of MCF. Average root mean square error in MCF over stance phase was 0.32 bodyweights. Static optimization detected the direction of change with at least 70% accuracy for early-stance reductions, late-stance reductions, and early-stance increases in peak MCF of at least 0.10 bodyweights. These results suggest that a static optimization approach accurately detects the direction of change in early-stance medial knee loading, potentially making it a valuable tool for evaluating the biomechanical efficacy of gait modifications for knee osteoarthritis.
Keywords: Knee contact force; Knee osteoarthritis; Musculoskeletal simulation; Static optimization.
Copyright © 2023 Elsevier Ltd. All rights reserved.