Garnet/polymer solid electrolytes for high-performance solid-state lithium metal batteries: The role of amorphous Li2O2

Kashif Khan; Hu Xin; Bowen Fu; Muhammad Bilal Hanif; Pengyu Li; Bayu Admasu Beshiwork; Zixuan Fang; Martin Motola; Ziqiang Xu; Mengqiang Wu

doi:10.1016/j.jcis.2023.03.116

Garnet/polymer solid electrolytes for high-performance solid-state lithium metal batteries: The role of amorphous Li₂O₂

J Colloid Interface Sci. 2023 Jul 15:642:246-254. doi: 10.1016/j.jcis.2023.03.116. Epub 2023 Mar 22.

Authors

Affiliations

¹ School of Materials and Energy, University of Electronic Science and Technology of China, Chengdu 611731, PR China.
² Department of Inorganic Chemistry, Faculty of Natural Sciences, Comenius University in Bratislava, 842 15 Bratislava, Slovakia.
³ School of Materials and Energy, University of Electronic Science and Technology of China, Chengdu 611731, PR China; Yangtze Delta Region Institute (Huzhou), University of Electronic Science and Technology of China, Huzhou, Zhejiang 313001, PR China.
⁴ School of Materials and Energy, University of Electronic Science and Technology of China, Chengdu 611731, PR China; Yangtze Delta Region Institute (Huzhou), University of Electronic Science and Technology of China, Huzhou, Zhejiang 313001, PR China. Electronic address: mwu@uestc.edu.cn.

PMID: 37018960
DOI: 10.1016/j.jcis.2023.03.116

Abstract

Solid-state electrolytes have been widely investigated for lithium batteries since they provide a high degree of safety. However, their low ionic conductivity and substantial growth of lithium dendrites hamper their commercial applications. Garnet-type Li_6.4La₃Zr_1.4Ta_0.6O₁₂ (LLZTO) is one of the most promising active fillers to advance the performance of the solid polymer electrolyte. Nevertheless, their performance is still limited due to their large interfacial resistance. Herein, we embedded the amorphous Li₂O₂ (LO) into LLZTO particles via the quenching process and successfully achieved an interfacial layer of Li₂O₂ around LLZTO particles (LLZTO@LO). Amorphous Li₂O₂ acts as a binder and showed an excellent affinity for Li⁺ ions which promotes their fast transference. Moreover, the stable and dense interfacial Li₂O₂ layer enhances interfacial contact and suppresses the lithium dendrite growth during the long operation cycling process. The PEO/10LLZTO@2LO solid composite polymer electrolyte (SCPE) showed the highest ionic conductivity of 3.2 × 10^-4 S cm^-1 at 40 °C as compared to pristine LLZTO-based SCPE. Moreover, the Li│(PEO/10LLZTO@2LO) │Li symmetric cell showed a stable and smooth long lifespan up to 1100 h at 40 °C. Furthermore, the LiFePO₄//Li full battery with PEO/10LLZTO@2LO SCPE demonstrated stable cycling performance for 400 cycles. These results constitute a significant step toward the practical application of solid-state lithium metal batteries (SS-LMBs).

Keywords: Interfacial layer; Ionic conductivity; Li(6.4)La(3)Zr(1.4)Ta(0.6)O(12); Solid state polymer electrolyte; Solid-state lithium metal batteries.