Quantitative prediction of ternary mixed gases based on an SnO2 sensor array and an SSA-BP neural network model

Meihua Li; Yunlong Gu; Yunfan Zhang; Xiaodong Gao; Shikun Ge; Guangfen Wei

doi:10.1039/d2cp04396c

Quantitative prediction of ternary mixed gases based on an SnO₂ sensor array and an SSA-BP neural network model

Phys Chem Chem Phys. 2023 Apr 12;25(15):10935-10945. doi: 10.1039/d2cp04396c.

Authors

Meihua Li^{1

2}, Yunlong Gu¹, Yunfan Zhang¹, Xiaodong Gao¹, Shikun Ge¹, Guangfen Wei^{1

2}

Affiliations

¹ School of Information and Electronic Engineering, Shandong Technology and Business University, Yantai 264005, China. limeihua@sdtbu.edu.cn.
² Key Laboratory of Sensing Technology and Control in Universities of Shandong, Shandong Technology and Business University, Yantai 264005, China.

PMID: 37016831
DOI: 10.1039/d2cp04396c

Abstract

This paper describes a tin oxide and copper doped tin oxide gas sensing material synthesized by a biological template method and simple hydrothermal reaction, which were used for the preparation of a gas sensor array. The sensor array is combined with the Sparrow Search Algorithm optimized BP neural network algorithm (SSA-BP) to predict and analyze the concentration of indoor toxic gases, including ammonia, xylene, and formaldehyde. Granular SnO₂ was prepared by the biological template method and Cu/SnO₂ doped with different copper ion concentrations was prepared by the hydrothermal method. The morphology of the synthesized nanomaterials was characterized by SEM, and the elemental composition and chemical state of the main elements were analyzed by XRD and XPS. The PL emission observed in the visible region is attributed to the defect level gap caused by oxygen. The optimal operating temperature, sensitivity, response/recovery time and the long-term stability of the sensor array have been studied. By combining the sensor array with the neural network algorithm in a simulated indoor environment at four humidity levels, the concentration information of the gas mixtures could be well predicted and the predicted concentration error was less than 0.84 ppm. Therefore, the sensor array prepared in this study combined with the SSA-BP algorithm achieved good results in predicting the concentrations of the three toxic mixtures.