The electromagnetic shielding (EMS) fabric is an important electromagnetic protection product, which is widely applied in various fields. The improvement of its shielding effectiveness (SE) has always been the focus of research. This article proposes to implant a metamaterial structure of a "split-ring resonator (SRR)" in the EMS fabrics, so that the fabric not only maintains the porous and lightweight characteristics, but also obtains the SE improvement. With the help of the invisible embroidery technology, stainless-steel filaments were used to implant hexagonal SRRs inside the fabric. The effectiveness and influencing factors of the SRR implantation were described by testing the SE of the fabric and analyzing the experimental results. It was concluded that the SRR implantation inside the fabric can effectively improve the SE of the fabric. For the stainless-steel EMS fabric, the increase amplitude of the SE reached between 6 dB and 15 dB in most frequency bands. The overall SE of the fabric showed a decrease trend with the reduction of the outer diameter of the SRR. The decrease trend was sometimes fast and sometimes slow. The decreasing amplitudes were different in various frequency ranges. The number of embroidery threads had a certain effect on the SE of the fabric. When other parameters remained unchanged, the increase of the diameter of the embroidery thread resulted in the increase of the SE of the fabric. However, the overall improvement was not significant. Finally, this article also points out that other influencing factors of the SRR need to be explored, and the failure phenomenon may occur under certain situations. The proposed method has the advantages of the simple process, convenient design, no pore formation, SE improvement retaining the original porous characteristics of the fabric. This paper provides a new idea for the design, production, and development of new EMS fabrics.
Keywords: electromagnetic shielding fabric; implantation; improvement; shielding effectiveness; split-ring resonator.