Forward osmosis membrane technology (FO) shows potential application prospects in biogas slurry concentration, which is conducive to promoting the sustainable development of biogas projects. However, at present, the key influencing factors of membrane concentration using FO are not well understood. Therefore, this study analyzed the influence of draw solution concentration, pH, temperature and cross-flow velocity on the concentration efficiency of FO membrane, and optimized the operation parameters of FO membrane. The results showed that the concentration effect of the NaCl draw solution at pH 5 or 9 was better than that at pH 7. The order of factor influencing the water flux was as follows: draw liquid concentration > cross-flow velocity > operating temperature. The optimal combination obtained by orthogonal analysis was under 45 °C, with a cross-flow velocity of 1 L/min and the use of 1.5 mol/L NaCl as draw solution. The results of the membrane cleaning implied that the recovery rate of the fouled membrane after acid-base cleaning is significantly higher (88%) than other cleaning solutions. This research offers a scientific reference for applying positive osmosis technology to re-utilize biogas slurry resources.
Keywords: biogas slurry; forward osmosis; membrane cleaning; membrane fouling; optimization.