The finite element method is a widely used numerical method to analyze structures in virtual space. This method can be used in the packaging industry to determine the mechanical properties of corrugated boxes. This study aims to create and validate a numerical model to predict the compression force of corrugated cardboard boxes by considering the influence of different cutout configurations of sidewalls. The types of investigated boxes are the following: the width and height of the boxes are 300 mm in each case and the length dimension of the boxes varied from 200 mm to 600 mm with a 100 mm increment. The cutout rates were 0%, 4%, 16%, 36%, and 64% with respect to the total surface area of sidewalls of the boxes. For the finite element analysis, a homogenized linear elastic orthotropic material model with Hill plasticity was used. The results of linear regressions show very good estimations to the numerical and experimental box compression test (BCT) values in each tested box group. Therefore, the numerical model can give a good prediction for the BCT force values from 0% cutout to 64% cutout rates. The accuracy of the numerical model decreases a little when the cutout rates are high. Based on the results, this paper presents a numerical model that can be used in the packaging design to estimate the compression strength of corrugated cardboard boxes.
Keywords: box compression test; compression force; cutout; finite element method; numerical model; paperboard packaging.