Recently, efficient decontamination of water and wastewater have attracted global attention due to the deficiency in the world's water sources. Herein, activated carbon (AC) derived from willow catkins (WCs) was successfully synthesized using chemical modification techniques and then loaded with different weight percentages of nickel ferrite nanocomposites (10, 25, 45, and 65 wt.%) via a one-step hydrothermal method. The morphology, chemical structure, and surface composition of the nickel ferrite supported on AC (NFAC) were analyzed by XRD, TEM, SEM, EDX, and FTIR spectroscopy. Textural properties (surface area) of the nanocomposites (NC) were investigated by using Brunauer-Emmett-Teller (BET) analysis. The prepared nanocomposites were tested on different dyes to form a system for water remediation and make this photocatalyst convenient to recycle. The photodegradation of rhodamine B dye was investigated by adjusting a variety of factors such as the amount of nickel in nanocomposites, the weight of photocatalyst, reaction time, and photocatalyst reusability. The 45NFAC photocatalyst exhibits excellent degradation efficiency toward rhodamine B dye, reaching 99.7% in 90 min under a simulated source of sunlight. To summarize, NFAC nanocomposites are potential photocatalysts for water environmental remediation because they are effective, reliable, and reusable.
Keywords: activated carbon; dye degradation; nickel ferrites; photocatalysis; water treatment; willow catkins.