High-resolution scanning probe microscopy (SPM) is a fundamental and efficient technology for surface characterization of modern materials at the subnanometre scale. The bottleneck of SPM is the probe and scanning tip. Materials with stable electrical, thermal, and mechanical properties for high-aspect-ratio (AR) tips are continuously being developed to improve their accuracy. Among these, GaN is emerging as a significant contender that serves as a replacement for standard Si probes. In this paper, for the first time, we present an approach that demonstrates the application of GaN microrods (MRs) as high-AR SPM probes. GaN MRs were grown using molecular beam epitaxy, transferred and mounted on a cantilever using focused electron beam-induced deposition and milled in a whisker tip using a focused ion beam in a scanning electron/ion microscope. The presence of a native oxide layer covering the GaN MR surface was confirmed by X-ray photoelectron spectroscopy. Current-voltage map measurements are also presented to indicate the elimination of the native oxide layer from the tip surface. The utility of the designed probes was tested using conductive atomic force microscopy and a 24-hour durability test in contact mode atomic force microscopy. Subsequently, the graphene stacks were imaged.
Keywords: Focused electron beam induced deposition; GaN microrods; GaN probes; Scanning electron microscopy; Scanning probe microscopy.
Copyright © 2023 The Authors. Published by Elsevier B.V. All rights reserved.