Packed tofu was produced by reheating the mixture of preheated soymilk and coagulant in a sealed container. This study aimed to replace the conventional heating method with RF heating during the reheating of soymilk for packed tofu production. In this study, dielectric properties (DPs), thermal properties (TPs), and rheological properties of soymilk were determined. A mathematical model was developed to simulate the RF heating process of soymilk to determine the appropriate packaging geometry. Water holding capacity (WHC), texture analysis, color measurement, and microstructure observation were performed to evaluate the quality of RF-heated packed tofu. Results showed that soymilk added with Glucono-Delta-Lactone (GDL) coagulated at the temperature above 60 °C, and the loss factor (ε″) was slightly reduced when soymilk was converted to tofu at coagulation temperature. Based on the simulation results, the cylindrical vessel (φ50 mm × 100 mm) was chosen as the soymilk container for desired heating rate (5.9 °C/min) and uniformity (λ = 0.0065, 0.0069, 0.0016 for top, middle, and bottom layers). The texture analysis revealed that the hardness and chewiness of packed tofu prepared by RF heating were enhanced (maximum 1.36 times and 1.21 times) compared with commercial packed tofu, while the springiness were not significantly changed. Furthermore, the denser network structure was observed inside RF-heated packed tofu by SEM. These results indicated that packed tofu prepared by RF heating was of higher gel strength and sensory quality. RF heating has the potential to be applied in packed tofu production.
Keywords: Coagulation; Computer simulation; Packed tofu; Quality evaluation; RF heating; Reheating of soymilk.
© 2023 The Authors.