Ultraviolet-C (UV-C) irradiation is a well-recognized technology for improving blueberry postharvest quality, and previous literature indicates that it has the potential for dual-use as an antimicrobial intervention for this industry. However, the practicality and feasibility of deploying this technology in fresh blueberry fruit are significantly hindered by the shadowing effect occurring at the blossom-end scar of the fruit. The purpose of this study was to determine if treating the blueberry fruit within a chamber fitted with UV-Light Emitting Diodes (LEDs) emitting a peak UV-C at 275 nm could minimize this shadowing and result in improved treatment efficacy. Ten blueberry fruits were dip-inoculated with E. coli at a concentration of 105 CFU/mL and irradiated within the system at doses of 0, 1.617, 3.234, 9.702, and 16.17 mJ/cm2 (0, 30, 60, 180, and 300 s). Statistical analysis was performed to characterize the extent of microbial survival as well as the UV-C inactivation kinetics. A maximum of 0.91-0.95 log reduction was observed, which attenuated after 60 s of treatment. The microbial inactivation and survival were thus modeled using the Geeraerd-tail model in Microsoft Excel with the GInaFIt add-in (RMSE = 0.2862). Temperatures fluctuated between 23 ± 0.5°C and 39.5°C ± 0.5°C during treatment but did not statistically impact the treatment efficacy (P = 0.0823). The data indicate that the design of a UV-LED system may improve the antimicrobial efficacy of UV-C technology for the surface decontamination of irregularly shaped fruits, and that further optimization could facilitate its use in the industry.
Keywords: 275 nm; Blueberry; UV-C; UV-LED; Ultraviolet light.
Copyright © 2023 The Authors. Published by Elsevier Inc. All rights reserved.