An arc array synthetic aperture radar (AA-SAR) is a new type of omnidirectional observation and imaging system. Based on linear array 3D imaging, this paper introduces a keystone algorithm combined with the arc array SAR 2D imaging method and proposes a modified 3D imaging algorithm based on keystone transformation. The first step is to discuss the target azimuth angle, retain the far-field approximation method of the first-order term, analyze the influence of the forward motion of the platform on the along-track position, and realize the two-dimensional focusing of the target slant range-azimuth direction. The second step is to redefine a new azimuth angle variable in the slant-range along-track imaging and use the keystone-based processing algorithm in the range frequency domain to eliminate the coupling term generated by the array angle and the slant-range time. The corrected data are used to perform along-track pulse compression to obtain the focused image of the target and realize the three-dimensional imaging of the target. Finally, in this article, the spatial resolution of the AA-SAR system in the forward-looking state is analyzed in detail, and the change in the spatial resolution of the system and the effectiveness of the algorithm are verified through simulation.
Keywords: arc array; first-order term approximation method; forward motion of the carrier platform; improved keystone-based processing; spatial resolution; synthetic aperture radar (SAR).