Agro-industrial wastes and by-products are the natural and abundant resources of biomaterials to obtain various value-added items such as biopolymer films, bio-composites and enzymes. This study presents a way to fractionate and to convert an agro-industrial residue, sugarcane bagasse (SB), into useful materials with potential applications. Initially cellulose was extracted from SB which was then converted into methylcellulose. The synthesized methylcellulose was characterized by scanning electron microscopy and FTIR. Biopolymer film was prepared by using methylcellulose, polyvinyl alcohol (PVA), glutaraldehyde, starch and glycerol. The biopolymer was characterized to exhibit 16.30 MPa tensile strength, 0.05 g/m2 h of water vapor transmission rate, 366 % of water absorption to its original weight after 115 min of immersion, 59.08 % water solubility, 99.05 % moisture retention capability and 6.01 % of moisture absorption after 144 h. Furthermore, in vitro studies on absorption and dissolution of model drug by biopolymer showed 2.04 and 104.59 % of swelling ratio and equilibrium water content, respectively. Biocompatibility of the biopolymer was checked by using gelatin media and it was observed that swelling ratio was higher in initial 20 min of contact. The extracted hemicellulose and pectin from SB were fermented by a thermophilic bacterial strain, Neobacillus sedimentimangrovi UE25 that yielded 12.52 and 6.4 IU mL-1 of xylanase and pectinase, respectively. These industrially important enzymes further augmented the utility of SB in this study. Therefore, this study emphasizes the possibility for industrial application of SB to form various products.
Keywords: Biopolymer; Cellulose; Hemicellulose; Methylcellulose; Pectin; Polyvinyl alcohol; Sugarcane bagasse.
Copyright © 2023 Elsevier B.V. All rights reserved.