A stable and seamless adhesion between the human skin and the hydrogel-based electronic skin is necessary for accurate sensing and human health monitoring in aquatic environments. Despite achieving significant progress in this field, it remains a great challenge to design skin-interfaced conductive hydrogels with high electrical conductivity, stablility, and seamless underwater adhesion to skin. Herein, a skin-inspired conductive multifunctional hydrogel is proposed, which has a wet-adhesive/hydrophilic and a non-adhesive/hydrophobic bilayer structure. The hydrogel shows high stretchability (∼2400%) and an ultra-low modulus (4.5 kPa), which facilitate the conformal and seamless attachment of the hydrogel to the skin with reduced motion artifacts. Owing to synergistic physical and chemical interactions, this hydrogel can achieve reliable underwater adhesion and display remarkable underwater adhesion strength (388.1 kPa) to porcine skin. In addition, MXene has been employed to obtain high electrical conductivity, create a route for stable electron transport, and reinforce mechanical properties. The hydrogel also possesses self-healing ability, a low swelling ratio (∼3.8%), biocompatibility, and specific adhesion to biological tissues in water. Facilitated with these advantages, the hydrogel-based electrodes achieve reliable electrophysiological signal detection in both air and wet conditions and demonstrate a higher signal-to-noise ratio (28.3 dB) than that of commercial Ag/AgCl gel electrodes (18.5 dB). Also, the hydrogel can be utilized as a strain sensor with high sensitivity for underwater communication. This multifunctional hydrogel improves the stability of the skin-hydrogel interface in aquatic environments and is expected to be promising for the next-generation bio-integrated electronics.
Keywords: conductive hydrogel; seamless adhesion; skin-interfaced sensor; skin−sensor interface; wet adhesion.