In the context of energy conservation and emission reduction, more and more attention has been paid to the development of lightweight metal materials with both high strength and high toughness. Inspired by the non-smooth surface of natural organisms, a biomimetic surface with various spacing reticulate units of 7075 aluminum alloys was modified by laser cladding. The microstructure, microhardness and tensile properties of the various spacing units with CeO2-SiC-Ni60 were studied. The finer microstructure and the higher microhardness of various spacing units in comparison with that of 7075 aluminum alloys were obtained, no matter the strip-like treated region or the cross-junction region. Moreover, the best combination of strength and toughness of the biomimetic sample with 2.5 mm spacing reticulate unit was discussed. Finally, by combining the microstructure, XRD phase change, thermal gradient effect, thermal expansion coefficient difference and hard phase strengthening mechanism, it was concluded that the 2.5 mm spacing reticulate unit had the best ability to inhibit crack propagation, and the dispersive hard phases of Al3Ni2 and SiC played a major role in stress release of the matrix.
Keywords: 7075 aluminum alloy; biomimetic surface; laser cladding; strength and toughness.