Emerging trends like the Internet of Things require an increasing number of different sensors, actuators and electronic devices. To enable new applications, such as wearables and electronic skins, flexible sensor technologies are required. However, established technologies for the fabrication of sensors and actuators, as well as the related packaging, are based on rigid substrates, i.e., silicon wafer substrates and printed circuit boards (PCB). Moreover, most of the flexible substrates investigated until now are not compatible with the aforementioned fabrication technologies on wafers due to their lack of chemical inertness and handling issues. In this presented paper, we demonstrate a conceptually new approach to transfer structures, dies, and electronic components to a flexible substrate by lift-off. The structures to be transferred, including the related electrical contacts and packaging, are fabricated on a rigid carrier substrate, coated with the flexible substrate and finally lifted off from the carrier. The benefits of this approach are the combined advantages of using established semiconductor and microsystem fabrication technologies as well as packaging technologies, such as high precision and miniaturization, as well as a variety of available materials and processes together with those of flexible substrates, such as a geometry adaptivity, lightweight structures and low costs.
Keywords: Parylene; chip scale packaging; electronics packaging; flexible PCB; flexible electronics; integration technologies; metallization; thin film electronics; transfer.