The small-balloon technique used to retrieve a dislodged coronary stent is less studied. We investigated the small-balloon technique to study the capture force and retrieval rate of dislodged proximal or distal stents. We developed a retrieval model for stent dislodgement and performed bench tests to compare proximal and distal capture. We evaluated capture force by capture site in a fixed stent dislodgement model and capture force and retrieval rate by capture site using a retrieval model of stent dislodgement. Three-dimensional (3D)-micro-computed tomography (CT) was used to scan the captured conditions of the distal (DC) and proximal (PC) groups. Stent, balloon shaft, and guiding catheter (GC) diameters were measured. Retrieval areas within GC were calculated and compared. The force was significantly lower in the PC group than in the DC group (p < 0.01). Successful retrieval was achieved in 100% and 84.8% in the PC and DC groups, respectively. The force required to retrieve the dislodged stent was significantly lower in the PC group than that in the DC group (p < 0.01). The force was significantly lower in the successful cases in the DC group than in the unsuccessful cases (p < 0.01). The retrievable areas in the PC and DC groups were 67.5% and 32.7%, respectively, as calculated from the values measured from the 3D-CT images. The success rate of PC was higher than that of DC using the small-balloon technique. The smaller proximal stent gap in the PC method facilitated the retrieval of the dislodgement stent.
Keywords: Dislodged stent; Distal capture; Proximal capture; Small-balloon technique.
© 2023. The Author(s) under exclusive licence to Japanese Association of Cardiovascular Intervention and Therapeutics.